Spiderbeam HD 14m fiberglass pole

(clamp kit included)

Guy belt for 12m fiberglass pole

This strong guy belt is an ideal method for quickly attaching guy ropes to the pole. The belt is very flexible and lightweight and transfers the forces into the mast over a very large area, thus preventing damage.

Simply slide the belt over the mast. 

Spiderbeam 10m MINI fiberglass pole

Guy belt set for 18m fiberglass pole

These strong guy belts are an ideal method for quickly attaching guy ropes to the pole. The belts are very flexible and lightweight and transfer the forces into the mast over a very large area, thus preventing damage of the fiberglass tubes.

Set contains two belts for guying our 18m fiberglass at two levels.
Simply slide them over the mast. 

Spiderbeam HD 14m fiberglass pole

(set of clamps and washers for tie rods included)

Spiderbeam 18m fiberglass pole

Spiderbeam 7 m fiberglass pole

This lightweight 300mm long ground peg is made from polypropylene plastic 23x23mm T-shape and well suited for guying our fiberglass telescopic poles (12m, 18m). The peg has got a 5mm diameter hole usable for attaching guy lines with shackles or rings. 
Weight = 0.035kg

Spiderbeam 26m fiberglass pole

2mm diameter high strength Kevlar guy line - for guying 12m and 18m fiberglass pole -
breaking strength: 150kg
weight: 4g per meter very low
stretch: 1% UV resistant

Spiderbeam 4 m fiberglass pole

1mm diameter strong Kevlar guy line
- for upper guy lines of 18m and 26m fiberglass pole -

breaking strength: 60 kg
weight: 0,7 g per meter
very low stretch: 1%
UV resistant

Spiderbeam HD 12m fiberglass pole (eyelet version)

This special top segment of our 12m fiberglass pole, enables easy attachment of any kind of device to the tip of the pole. A custom-made stainless-steel eyelet is glued into the top with weatherproof and UV-resistant adhesive. This special eyelet-segment replaces the standard top segment of the pole. No further adjustments are necessary.

Spiderbeam bag for 12m and 14m poles

Lined canvas bag.

Dimensions:

Length: 126 cm

Width: 9 cm

Weight: 220 g

Clamp set for 12m fiberglass pole

Complete set:
Contains 11 stainless steel clamps with rubber padding.

Clamps are the perfect method to securely lock the segments of the fiberglass mast for a long period. They are especially suitable for permanent installations and superior to all other locking mechanisms (tape, glue, cable ties..). They have a very strong grip, yet they can be removed easily even after years of installation.